Who needs an electrical license?
Anyone who performs new construction and rewiring of existing structures; installs electrical wiring equipment devices, light fixtures, services and meter bases.
How do I get a contractor back to finish a project?
First, you need to get a detailed list of work to be performed and how payments are to be made. Remember, never make a final payment until an electrical inspector performs an inspection and you have a copy of the certificate of compliance.
Where can I get the latest edition of the National Electric Code?
You can purchase them from our office at 830 N Main St. or most electrical supply businesses, bookstores or the National Fire Prevention Association by calling 1-800-344-3555 or the International Association of Electrical Inspectors at 1-800-786-4234.
How do I know if a contractor has a required license?
Ask to see the current license. If in doubt, call 719-543-0002 to verify that the license is current.
How high should the meter be?
The current City ordinance requires the meter be between 4' and 5 1/2' to the bottom of the meter can.
Can I run a water line and an electrical line in the same trench?
Yes. As long as the minimum depth requirements is maintained for each line. We suggest that a separation be kept between the lines to allow for repair of one without affecting the other.
What time is my inspection?
The best way is to talk to the inspector between 8:30am and 9:00am, the inspector can give a text message approximately 30 min before arrival. The inspectors will normally leave for the field between 9:00am and 9:30am.
Who can answer code/ installation questions?
Electrical inspectors are available in the office or by phone (719-543-0002) from 7:30 a.m. to 9:00 a.m. Monday-Friday.
Electrical - Can I use my electrical service for the house for temporary construction power?
Yes. The permanent service may be installed prior to the electrical systems. Some of the service equipment is intended for indoor use only. If a wall and roof are not in place, an adequate method of protecting this equipment from the weather (water, wind, snow, etc.) shall be required. PLEASE NOTE: No electrical installations (wiring and boxes) can be made until there is a waterproof roof and adequate protection at the exterior walls.
Where are Arc Fault required residentially?
210.12 Arc-Fault Circuit-Interrupter Protection. Definition: Arc-Fault Circuit-Interrupter Protection (AFCI). A device intended to provide protection from the effects of arc faults by recognizing characteristics unique to arcing and by functioning to de-energize the circuit when an arc fault is detected. National Electrical code NFPA 70 210.12 requires the following areas to have arc fault protection: all 15 and 20 ampere branch circuits supplying outlets installed in dwelling units. In family rooms, dining rooms, living rooms, parlors, libraries, dens, bedrooms, sunrooms, recreation rooms, closets, hallways, or similar rooms or areas.